How to Use:
EMPTYING Dirty water tank
1
Locate the Dirty
Water Tank
The Dirty Water
tank is the tank
located on the
front of the
machine.
CAUTION
Check the Power
Button to make
sure the machine
is in the "off"
position.
4
Secure Dirty Water Tank
Rinse out the
Dirty Water Tank
with warm water
and screw lid
back on tank.
Securely place
the Dirty Water
Tank back onto
the machine. You
will hear a click
sound when the
tank has locked
into place.
10
PART #71498
R U G D O C T O R P R O D E E P C A R P E T C L E A N E R
FILE NAME
RUGDOC_12336-1_MANUAL UPDATE
>>
CLIENT
RUGDOC
>>
JOB NUMBER
12336
>>
MANUAL
ELEMENT
>>
ACCOUNT
>>
KP
PRODUCTION ARTIST
>>
LOOMIS is releasing this file as requested for release noted below. We are relinquishing all responsibility for the completion of the project and the Agency will be held harmless for any
error, oversights, omissions or other issues that may subsequently arise during the course of completion for this project.
3
2
Remove Dirty Water
Release the Dirty
Water Tank
Unscrew the
Wide Opening
Push the Dirty Water
Lid on the back
Tank Release Button
of the tank and
and pull the tank in
pour out the
an outward motion to
dirty water.
release tank.
NOTE: DO NOT pour into
sink or tub. Dirty water
should be poured into
toilet or outside.
EASY LIFT CADDY
Remove the Easy
Replace the Easy Lift Caddy
Lift Caddy
Place the front end of the
Lower the Main Handle.
Easy Lift Caddy back onto
Release both Easy Lift
the machine, making sure
Caddy Locks on the
that latches (on the front
back of the machine. The
end of the Easy Lift Caddy)
Easy Lift Caddy may be
engage with the holes in the
used to transport both
machine base.
tanks for easy filling and
Lower the back of the Caddy
emptying of tanks.
to sit on the machine base,
and secure with the Easy Lift
Caddy Locks.
|
U s e r M a n u a l
BLEED
.9" X 11.5"
>>
TRIM
8.5" X 11"
>>
N/A"
LIVE
>>
4/4
COLOR
>>
1" = 1"
SCALE
>>
INDICATOR LIGHTS
The Pro Deep Carpet Cleaner is equipped with a helpful indicator light system
designed to quickly alert you of issues while cleaning. The Pro Deep Carpet Cleaner
has exclusive "Brush Jam" and "Solution Empty" Indicator Lights.
The Brush Jam Indicator Light is triggered when
every-day items (such as socks, small toys etc.)
become lodged in the Brush Roll, jamming and
preventing the Brush Roll from spinning. When the
machine detects a jam, the brush motor will shut off
and the Brush Jam Indicator Light will illuminate.
The Brush Jam Indicator Light system protects the
machine and prevents belt burn-out.
Removing Brush Roll Jam
1
Illuminated
Indicator Light
The Brush Jam
Indicator Light will
illuminate if the
machine detects
a Brush Roll jam.
2
Access the Brush Roll
Turn off the machine and unplug
the machine from the power outlet.
Remove water tanks.
Gently position the machine on
its back to access the Brush Roll.
3
Remove the Jam
Gently remove jammed
item from the Brush Roll.
Once jammed item
is removed, place
the machine upright,
replace both tanks,
plug in machine and
press Power Button to
Carpet mode to continue
cleaning.
r u g d o c t o r . c o m
|
1 - 8 0 0 - 7 8 4 - 3 6 2 8
The Solution Empty Indicator Light is triggered
when the water level in the Clean Water Tank
is depleted. The Solution Empty Indicator Light
system protects the machine and prevents pump
burn-out from the machine running dry.
Refilling Cleaning Solution
1
Illuminated
Indicator Light
The Solution Empty
Indicator Light will
illuminate if the machine
detects the Clean
Water Tank is empty.
2
Add Cleaning Solution & Water
Fill the tank with HOT tap
water until it reaches the fill
line and add Rug Doctor
Fill Line
cleaning solution (follow
instructions on cleaning
solution bottle).
See full instructions on page 8.
Tightly screw the cap back
onto the tank.
3
Now You're
Ready to Clean!
Place the full Clean
Water Tank back onto
the machine. You will
hear a click sound
when the tank has
locked into place.
11