Senix CSE10-L Manual Del Operador página 10

This operator's manual describes safety and international symbols and pictographs that may
appear on this product. Read the operator's manual for complete safety, assembly, operating and
maintenance and repair information.
SAFETY ALERT SYMBOL
Indicates danger, warning or caution.
May be used in conjunction with other
symbols or pictographs.
READ OPERATOR'S MANUAL
WARNING:Read the operator's
manual(s) and follow all warnings and
safety instructions. Failure to do so can
result in serious injury to the operator
and/or bystanders.
WEAR EYE AND HEARING PROTECTION
WARNING:Thrown objects and
loud noise can cause severe eye injury
and hearing loss. Wear eye protection
meeting current ANSI / ISEA Z87.1
standards and ear protection when
operating this unit. Use a full face shield
when needed.
WEAR DUST MASK
Wear breathing protection.
WEAR HAND PROTECTION
Wear heavy duty work gloves to protect
hands.
WEAR FOOT PROTECTION
Wear boots with slip-resistant and
puncture-resistant soles.
WARNING: Failure to keep your hands
away from the blade will result in
serious personal injury.
WARNING: Remove plug from
the mains immediately if the cable is
damaged or cut.
WARNING: Thrown objects can
ricochet and result in personal injury or
property damage.
CLASS II CONSTRUCTION
Double-Insulation. When servicing, use
only identical replacement parts.
WWW.SENIXTOOLS.COM
SAFETY & INTERNATIONAL SYMBOLS
KEEP BYSTANDERS AWAY
WARNING: Keep all bystanders,
especially children and pets, at least 50
feet (15 m) from the operating area.
WARNING: DO NOT expose to rain.
WARNING: Contact of the chain bar tip
with any object should be avoided.
WARNING: Tip contact can cause the
chain bar to move suddenly upward
and backward, which can cause serious
injury.
WARNING: Always use two hands
when operating the chain saw.
GUARD AGAINST ELECTRIC SHOCK
Prevent body contact with earthed or
grounded surfaces (e.g. metal railings,
lamp-posts, etc.). Electric safety can
be further improved by using a high-
sensitivity (30 mA/30mS) Residual
Current Device (RCD).
9