OPERATION
Control
panel
Warning Light __
Power Control --
Mode Control
Fan Speed
Control
Timer On / Off
Timer / Temp
Set Control
POWER
CONTROL
The power control turns the unit on and off.
WARNING
CONTROL
Condensed water may accumulate in the unit. If the internal tank becomes full, the Warning Light will shine and the unit will not operate until
the unit has been drained.
FAN MODE
When fan mode is selected the indicator light will shine yellow. Air is circulated throughout
the room with no cooling.
NOTE:
Unit does not need to be vented in fan mode.
MODE
CONTROL
The Mode Control has three settings:
Cool
Dehumidify
Fan
The settings are adjusted with the Mode Control button. A light will indicate which setting is currently being used.
FAN SPEED
CONTROL
The Fan Speed Control has 3 setting: High, Medium, and Low.