Automatic Mode; Manual Mode; Vacation Mode; Battery Replacement - Honeywell TL8100 Guia Del Usuario

TL8100
SET THE TIME AND DAY
1. Set the time, using the HOUR and MINUTE buttons.
2. Set the day, using the DAY button.

AUTOMATIC MODE

Use automatic mode if you want the
thermostat to follow the programmed
schedule. The thermostat will switch from
the Comfort temperature to the Economy
temperature, or vice versa according to
the schedule.
To use the automatic mode, press the
Manual/Auto button repeatedly until
appears on the screen.
Temporary Bypass
You can bypass the temperature setpoint of the current
period when the thermostat is in Automatic mode.
To do so, press one of
temperature is displayed or select a preset temperature
by pressing the corresponding button (
You can cancel the bypass, by pressing the Manual/Auto
button twice, before it cancels automatically at the start of
the next period.
Schedule Programming
You can program up to 4 periods in a day. The Comfort
temperaure is used in periods 1 and 3 and the Economy
temperature is used in periods 2 and 4. The start time of
each period can be different for each day of the week.
For each day, enter the time you wake up (period 1), the
time you leave for work (period 2), the time you return
home (period 3) and the time you go to sleep (period 4):
Period Associated Temperature
1
2
Economy
3
4
Economy
NOTE: For periods 1 and 3, set the start time earlier by
at least 15 minutes for every 2°F (1°C) that the
temperature needs to rise. For example, if you
lower the temperature by 6°F (3°C) at night and
you wake up at 7:00 a.m., set period 1 to
6:15 a.m.
• Press Program to enter the programming mode. The
thermostat will display MO (Monday) and PROG 1
(period 1).
• To select another day, press Day.
69-2018EFS—03
button until the desired
, or
Time
Wake up
Comfort
Leave home
Return home
Comfort
Sleep
• NOTE: To select all 7 days, hold Day for 3 seconds.
When all 7 days are selected, the start time of the
period being displayed will be the same every day.
• To select another period, press Program.
• Press Hour and Min to set the start time for the
displayed period. If you want the thermostat to skip a
period, press Clear, the time display of the displayed
period becomes --:--.
• Press Manual/Auto to exit.
NOTE: If you do not press any button for 60 seconds,
the thermostat will automatically exit the pro-
gramming mode and save any changes made.

MANUAL MODE

In manual mode, the programmed
schedule is not followed. Use this mode if
you wish to set the temperature manually
or maintain the same temperature all the
time.
To use the manual mode, press the
Manual/Auto button repeatedly until the
hand icon
).
Press one of
desired temperature is displayed or select a preset
temperature by pressing the corresponding button (
or ).

VACATION MODE

In Vacation mode, the thermostat is set to
the Vacation temperature. There are 2
ways to place the thermostat in Vacation
mode.
• Press on the thermostat.
• From the remote control system or
home automation system.
NOTE: The Vacation mode can only be
deactivated remotely if it has
been activated remotely.

BATTERY REPLACEMENT

An icon appears when
the batteries must be
replaced. The icon
remains on the display
for 60 days.
Afterwards, the
thermostat will cut
power to the heating
system.
The time and
programming are saved for the first 15 seconds when the
batteries are removed.
2
appears on the screen.
buttons until the
,