Tenovis TB 510 Manual De Manejo página 25

English
Setting the telephone
Adapting the telephone to a telephone system
Lift the handset.
P
Press this key to initiate programming.
Enter the code.
Press this key.
Enter code "96", for example, for the function "Flash = 250 ms".
You can enter the following codes here:
-- DTMF 90/90 * (factory setting):
-- DTMF 90/140:
Press this key again to enter another code.
-- Flash = 80 ms * (factory setting):
-- Flash = 100 ms:
-- Flash = 250 ms:
* for Integral PABX systems
P
Press this key to complete the programming procedure.
Changing factory settings
Lift the handset.
P
Press these keys to initiate programming.
Press this key.
Enter code "251", for example, to delete all stored speed--dial
numbers.
Press this key again to enter another code.
92
93
94
95
96
TB 510
25