TRENDnet TW100-BRV204 Guía De Instalación Rápida página 11

6. Click OK.
7. Click Close on the Local Area Connection Properties box.
8. Click on Start; click on Run. Then type cmd and click OK.
9. The Command Prompt window will appear. Type ipconfig at the C:\ prompt
and press the Enter key.
10. If your IP Address shows the following information your computer is now
successfully connected to the router:
IP Address: 192.168.0.x
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
NOTE: If the information shown is incorrect, please reboot the computer
and retry the steps above.
9
English