Aiphone JK-1MD Manual De Instalación Y Operación página 10

6-9 Backlight adjustment, Night sensitivity adjustment
To perform adjustment
1
Press ADJUST button when the screen is difficult to see.
• Automatic adjustment to a more visible screen is performed.
<Day>
[Before adjustment] [Before adjustment]
[After adjustment]
6-10 If optional units are installed
1
When a separately-installed sensor detects a malfunction or CALL
button is pressed, the alarm sound occurs and the transmit LED (red)
flashes.
NOTES: If there is a call from the entrance or another inside unit during notification, the system switches to the entrance or other inside unit (communication is
prioritized).
7
TECHNICAL PRECAUTIONS
• Operating temperature: 0 C to 40 C (+32 F to +104 F)
• The video image may distort when the door release is activated. But
this is not a unit malfunction.
• Cleaning: Clean the units with a soft cloth dampened with a neutral
household cleanser. Do not use any abrasive cleaner or
cloth.
8
SPECIFICATIONS
• Power:
DC 18 V
• Current consumption: (Max.) 400 mA
• Calling:
Chime and image, approx. 45 seconds
• Communication:
<HANDS-FREE mode> Hands-free: 60 sec.
<PTT mode> Press-to-talk, release to listen: 60
sec.
• Video monitor:
3-1/2" direct view TFT color LCD
• Scanning lines:
525 lines
<Night>
[After adjustment]
To halt adjustment
1
Press ADJUST button during adjustment.
NOTES: 1. Distinguishing between day and night is automatically done by
the door station.
2. Pressing ADJUST button at night makes the caller's face
easier to see, but moving subjects may be more difficult to see.
2
Press OFF button to stop the alarm sound.
1. Even if the chime tone and alert sound volume is set to 0 (OFF), it
will sound at a level equivalent to 10 (HIGH).
2. The alarm sound stops after 30 seconds and restoration occurs
even if OFF button is not pressed.
• If there is a system malfunction, turn the POWER switch at the
monitor station OFF and back ON again. If this does not solve
the problem, unplug the DC power supply and contact a qualified
technician for service.
• Door release contact: AC/DC 24 V, 0.5 A (N/O dry closure contact L, L)
(Minimum contact : 100 mV DC, 0.1 mA)
(Aiphone's EL-12S is recommended.)
• Dimensions:
185 (H) x 135 (W) x 27 (D) (mm)
7-5/16 (H) x 5-5/16 (W) x 1-1/16 (D) (inches)
• Weight:
Approx. 370 g (0.82 lbs.)
- 10 -