Technical Data - Festo EduTrainer KTP700 Manual Del Usuario

7 Technical data

General
Dimensions
Layout
Weight
Ambient conditions
Protection
Subject to change without notice
Electrical specifications
Input voltage
Output voltage
Power consumption
Output connections
Supply connection
Subject to change without notice
Due to the installation stipulations specified by the manufacturer of the touch panel, the device may only be
used in an A4 frame. Use as a tabletop device contradicts the specified installation conditions and is not
permissible.
Configurable as of WinCC Basic V13 / Step7 Basic V13
The device fulfils requirements specified in EN 55011, limit value class A.
Note
The operator unit is not intended for use in residential areas. If the operator unit is used in
residential areas, radio and television reception may be affected.
© Festo Didactic 8065593
266 mm x 297 mm x 110 mm
Console housing with rubber feet for use in an A4 frame
1.65 kg
5 to 40° C, 60% atmospheric humidity
IP 20
+24 V DC
Corresponds to input voltage
5.5 W, max. 0.23 A
For 4 mm safety plugs
With 4 mm safety sockets
23