Using The Parrot Minikit Smart While On A Call; The Kit Seems To Be Frozen; The Kit Does Not Seem To Work With My Phone - Parrot MINIKIT Smart Guía De Instalación Rápida

Note: At any time, press the red key to exit voice
recognition mode.
To make a call manually
1. Press the jog wheel and select Phonebook.
2. Select a letter and push the jog wheel.
3. Once the contact chosen, press the green key to
call this contact or use the jog wheel to choose
between different numbers of the same contact.
Hold down the green key of the Parrot MINIKIT Smart
for two seconds to redial the last dialled number.

Using the Parrot MINIKIT Smart while on a call

Note: Navigation instructions are not played by the Parrot
MINIKIT Smart during a call.
Use the jog wheel during a call to adjust the
communication volume. The volume setting is saved
for subsequent calls.
During a call, if you want to continue the conversation
on your phone (private conversation), press the green
button.
During a call, the Parrot Parrot MINIKIT Smart allows
you to send DTMFs to manage your voice mail for
example. To do so, press the jog wheel to access the
DTMF menu.
English
Troubleshooting
The kit says «Memory full»
You can pair up to ten devices. If you attempt to pair an
eleventh phone, the kit says «memory full». You must clear
the memory by holding down both the red button and the
jogwheel for three seconds. Doing so also clears all the
contacts.

The kit seems to be frozen

In case of malfunction, you can reboot the Parrot MINIKIT
Smart. To do so, press the Reset button (diagram 7 p.7).

The kit does not seem to work with my phone

Make sure your phone is compatible with the Parrot
MINIKIT Smart. To do so, refer to the compatibility list
of the Parrot MINIKIT Smart available on our website
www.parrot.com, in the Support & Downloads section.
If your phone is compatible with the Parrot MINIKIT
Smart, make sure you have the latest software version on
your Parrot MINIKIT Smart. This update and the update
procedure are available on our website www.parrot.com,
in the Support & Downloads section.