Power Input - Brigade MDR-304 Instrucciones De Instalación De Inicio Rápido

ENGLISH
1
GPS
Remote
RS-232
5
1
GPS & Remote Control Connector:
The left side connector links up with the GPS receiver
to capture position information data. The right side
connector links up with the remote controller.
2
Audio Out/Video Out:
Your LCD monitor or other monitor can recieve a signal
(RCA Audio and Video Output to monitor) from this port.
3
AUX 1/AUX 2:
Use this if you have external audio sources. (RCA Audio
Inputs for use with external audio sources).
4
Camera in connector:
There are four connectors here to connect up to 4
cameras.
5
RS 232 port:
Service only.
6
I/O port:
This connector links up with an external device. (Alarm
Inputs) and outputs from vehicle.
7
Power Delay:
This connector will allow other vehicle devices that need
to work with the MDR to start-up after the MDR.
8

Power input:

This connector links up with the power from the vehicle
(12Vdc).
2 3
Audio Out AUX1
Video Out AUX2
I/O
IN1 IN2 IN3 IN4
OUT1 OUT2
6
1 2 3
Camera In
Power Delay
30A MAX
7
4
4
+12V ACC
8