Intellinet 561167 Guía De Instrucciones Rápida página 2

8-Port Desktop Gigabit Web-Smart PoE+ Switch with 2 SFP Ports
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual enclosed with this product
or at intellinetnetwork.com.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• On a level surface that can support the weight of the switch
(and any other items that need to be considered);
• With a minimum of 25 mm (approx. 1") of clearance on the top and sides
for adequate ventilation;
• Away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
• Where it cannot be affected by excessive moisture.
The switch includes brackets and screws for optional rack mounting.
1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch
and secure it in place with screws.
3. Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality, so you can use
straight or crossover UTP/STP cables to connect the RJ45 ports to PCs, routers,
hubs, other switches, etc.
• Use the included power cable to connect the receptacle on the back of the switch
to a power outlet, and confirm that the Power LED lights.
Basic Web-Based Browser Management
1. Open your Web browser.
2. Enter "http://" and the IP address of the switch in the Address field.
The default management IP address is 192.168.2.1.
3. Press <Enter> to display the login screen. In the Username field, enter "admin";
in the Password field, enter "1234." Click OK.
2
English
English