Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
F.
USB Port / External Power
• USB input jack
NOTE: Also used for AC power adapter.
G.
T1/T2, T3/T4, T1-T2, T3-T4
• While displaying T1/T2 in the primary display, press to alternate
between T1/T2 and T3/T4.
• Press and Hold to scroll the secondary display to temperature
differential and the internal temperature of the meter in the lower
display.
H.
Hold °C/°F/K (
• Press to freeze or release the displayed readings.
• Press and Hold for more than 1 second to switch between Celsius
(°C), Fahrenheit (°F), and Kelvin (K).
• The "
modes only.
I.
Logging Clear (Enter)
• Press to start or stop logging.
• Press and Hold for more than 1 second to clear logged readings.
• To clear logged data press and hold until "
lower display. To execute the clear press and hold until "
appears.
• The "ENTER" function is activated in the "SETUP" mode only.
2
1
12
Primary Display: T1 or T3 (Upper Line) T2 or T4 (Lower Line).
1.
2.
TYPE KJET: Type of thermocouple.
3.
SETUP: Setup is in progress.
RECALL: The logged readings are displayed.
4.
OFFSET: The thermocouple measurement includes an offset.
5.
6.
HOLD: The display readings do not change.
7.
LOW BATTERY: Replace batteries.
USB: The thermometer is connected to a PC via USB interface port.
8.
LOG: Readings are being logged.
9.
10.
°C,°F, K: Temperature units.
11.
Secondary Display: Internal temperature of the thermometer,
MEMORY, MIN, MAX, AVG, T1-T2 and T3-T4 reading. Shows the
memory location initially when a logged reading is recalled.
Time Display: 24-hour clock, shows the INTERVAL length in SETUP.
12.
• Shows elapsed time when AVG is on or before clock has been set.
• Shows the memory time later on when a logged reading is recalled.
)
" function is activated in the "RECALL" and "SETUP"
DISPLAY
3
4
" appears in the
5
6
"
7
8
9
10
11
5
Publicidad
Tabla de contenido
