Audio Setup; Video Setup - Marantz professional AVS Guia Del Usuario

Audio Setup

To set AVS as your default audio recording and playback device, follow the directions below based
on your computer's operating system.
Windows:
1. Use the included USB cable to connect the AVS to your computer.
2. In the Taskbar, locate the Volume Control "speaker" icon. Right-click the speaker and select
Playback Devices.
Alternatively, go to Start Menu > Control Panel (or Settings > Control Panel in Classic View) >
Hardware and Sound > Sound.
3. In the Windows Sound control panel select the Playback tab and select Marantz AVS Audio
as the default device.
4. Click the Recording tab and select Marantz AVS Audio as the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-channel, 24-bit, 48000 Hz (Studio
Quality) as the default format.
Note: Although AVS's audio interface supports up to 24-bit audio, the microphone's output is
16-bit only.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
macOS:
1. Use the included USB cable to connect the AVS to your computer.
2. Go to Applications > Utilities > Audio MIDI Setup.
3. In the Audio Devices window, select Marantz AVS Audio in the left column.
4. Right-click Marantz AVS Audio, and select Use this device for sound input.
5. Right-click Marantz AVS Audio, and select Use this device for sound output.
6. Quit Audio MIDI Setup.

Video Setup

To set AVS as a video capture device, follow the directions below:
1. Use the included USB cable to connect the AVS to your computer.
2. Press the Camera On/Off button to turn the camera on.
3. Open your software. If you have no other video capture devices connected, AVS should
automatically be selected in your software's video settings. Otherwise, select Marantz AVS
Video in the list of video capture devices.
4