Drum Change - Primer LP-08 Manual Tecnico

Step 10: Remove the cover of the control panel (A), and replace the module (B), releasing the
tabs (C).
Step 11: To assemble all the components, follow steps 2 to 10 in reverse. When attaching the
cover, make sure that the top clips (A) are correctly positioned.

1.2 DRUM CHANGE

In this chapter is summarized how to change the drum in professional washers of 8 and 10 kg.
Step 1: Remove worktop and exterior panels, both the rear and the two frontals to access to the
components that we are going to manipulate.
8