Operation; Switching On And Adjusting Volume And Squelch - Albrecht AE 6199 Manual De Instrucciones

Switching on and adjusting volume and squelch

The on/off switch is combined in the VR control. To switch on:
 Turn VR control from OFF position slightly right. LCD will be illuminated.
 Turn SQ control to the leftmost position. Then carefully turn right until the ASQ icon
on the LCD disappears. Now the background noise should be audible.
 Then adjust the volume to the desired level.
 Finally turn the squelch clockwise until the background noise just stops or turn it
fully counter clockwise to engage the automatic squelch ASQ
Selecting the correct country code
The AE 6199 has five user selectable country settings, which determine the channel count
and the useable modulation mode. The factory default setting and the starting country setting
(after connecting to Power) can vary depending on the sales country of this radio. Standard
setting is the country code 'd'.
Procedure to switch the country code:
 Switch the radio off
 Press A/F button (AM/FM) and keep button pressed
 Switch on the radio at the same time
 Release the button
 Now you can select the country setting between d, EC, Po, UK and E with the
UP/DN buttons.
 To verify your selection, turn the radio off and on again. The radio automatically
returns to the selected operation mode.
Country codes und usage:
E 40 channels AM and FM 4 W
This setting is the European standard AM/FM system which allows 40 channels
in AM and 40 Channels in FM as well. When this manual was issued, this
system was allowed in BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GR, HR,
HU, IE, IS, IT, LI, LU, LT, LV, MC, NL, NO, PL , PT, RO, SE, SL, SK and SM.
d 80 channels FM 4 W, 40 channels AM 4 W
This position is only allowed to be used in Germany, Czech and Slovak
Republic, because no other European country provides the German 80 FM
channels. (Note: In Slovak Republic use only CH 1-40 and 70-80 in FM)
No individual licence is necessary, but restrictions are still in force for base
stations in certain German border regions, where transmitting on channels 41 –
80 is not allowed or only with a special licence.
EC 40 channels FM only 4W
This is former "CEPT" mode, the programming which is allowed in most countries
(except Austria). Since AM is not allowed in this mode, the A/F key is disabled.
Po 40 channels AM and FM 4W

Operation

8