Philips DVDR 80/17 Manual De Instrucciones página 10

Output jacks (OUT 1 480p/480i)
OUT AUDIO LR
Analog audio output (red/white jack): Connection for an additional
device. Audio output for component video/progressive scan
OUT COMPONENT
Component video output (red/blue/green jack): Connection for
VIDEO an additional device with component video/progressive scan output
Output jacks (DIGITAL AUDIO OUT)
COAX OUT
Coaxial digital audio output:
OPTICAL AUDIO
Optical digital audio output:
OUT
Output jack (G LINK)
G-LINK
Connection of the IR Blaster(IR extender) for a cable box.
WARNING
This jack contains a 'DEMO PIN'. This enables a demonstration of the
GUIDE Plus+
Remove the Demo Pin to disable the Retail Demo feature.
The symbols on your DVD Recorder
display
The following symbols may appear on your DVD Recorder display:
Multifunction display/text line
•) Clock
•) Disc/Title play time
•) OTR time
•) Title name
•) Display of the TV channel number / playing time / function.
•) Display of information, warnings
IIIIIIIIIIIIIII
Disc bar: Displays the current position on the disc (disc pointer).
Play/Record: single flashing segment at the current position.
Pause: flashing segment on both sides of the current position.
Stop: flashing segment at the current position.
TIMER
A recording (Timer) has been programmed
TV
Modulator is switched off. The antenna signal (RF signal) is only
connected to the TV when the modulator is switched off.
PRO
Component Video output set to 'Progressive Scan.' If this is not
displayed, the Component Video output is set to 'Interlaced.'
o(((
Remote control command has been sent
® system to be shown automatically with stored data.