Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Operation (Continued)
WARNING: To avoid pinching or crushing hands or feet,
ALWAYS keep them clear of the jack hinge and ground
contact area when lowering the vehicle. The jack is a
lifting device only. DO NOT move or dolly the vehicle
while it is on the jack
Care and Cleaning
INSPECTION
The product shall be maintained according to these instructions.
You may not alter this product in any way.
1.
Before using, a thorough inspection shall be made on the jack. Look for cracks in the welds, bent,
damaged, loose, worn or missing parts.
2.
Inspect according to this manual ONLY.
3.
If the jack has been subjected to abnormal load or shock (abuse), perform an immediate
inspection. Take the product to a local customer service representative for an authorized
inspection before use.
Maintenance
TO ADD HYDRAULIC JACK OIL
1
Positioning on Level Ground
With saddle fully lowered
and the jack on level ground,
unscrew and remove oil fill
plug.
3
Filling the Oil Reservoir
Using a good grade of SAE 5W hydraulic jack
oil, fill the oil reservoir to the bottom of the
threads in the oil filler hole.
2
Removing Plug
Unscrew and remove oil
fill plug.
4
Replacing the Plug
Replace and tighten the
oil fill plug. Do not allow
dirt or debris to enter the
system.
6
Publicidad
Capítulos
Tabla de contenido
