Publicidad
Idiomas disponibles
Idiomas disponibles
2 RX, and from Media Converter 1 RX to Media Converter
2 TX. Maximum length and fiber cable specification
depend on the model. (See Specifications.)
POwEr
Plug the power adapter into the 5 V DC input jack on
the media converter, then connect it to a regular power
outlet. Only use the included power adapter or one with
matching specifications (output of 5 V DC, at least 1 A).
LEDs
PWR – The power adapter is connected when lit.
1000M – 1000 Mbps link on the twisted pair connection
when lit.
Link/Act (TP = RJ45; FP = Fiber) – Active link when lit; data
traffic when flashing; no active network link when unlit.
FDX/COL (for TP/RJ45) – Full duplex connection when lit;
data collisions when flashing; half duplex when unlit.
SD (for FP/Fiber) – Fiber optic signal is detected when lit;
no signal when unlit.
For specifications, go to intellinetnetwork.com.
3
ENGLISH
Publicidad
