Replacing The Batteries; Troubleshooting - OWIM HG02132A Instrucciones De Utilización Y De Seguridad

in the outdoor sensor or the temperature station
are weak.

Replacing the batteries

Open the battery compartment
Remove the exhausted batteries.
Insert two new 1.5 V
batteries (AA) into the battery compart-
ments.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in
the battery compartments (see Figs. B + D).
Close the battery compartments.

Troubleshooting

Note: This product has delicate electronic
components. This means that if it is placed
near an object that transmits radio signals, it
could cause interference.
If the display indicates a problem, move
such objects away from the temperature
station / outdoor sensor or remove the
batteries for a short while from the tem-
perature station / outdoor sensor and
then replace them.
Obstacles such as concrete walls can also
cause that the reception is disturbed. In this
case, change the location (eg near a window).
Please take note that the outdoor sensor should
always be set up within max. 30 meters (open
46 GB/IE
or
25
(direct current)
.
31