Setting Up The Camera; Setting Up The Receiver - Luda Elektronik cowCam lite Guia Del Usuario

6. Setting up the camera

Step by step
1. Connect the black camera antenna (2dBi) at the
back of the camera.
2. Attach the camera temporarily to the wall at an
appropriate position, maximum 12 meters from a
220V wall socket.
3. Go to the next step and attach the camera perma-
nently when installation is finished and you are sat-
isfied with the picture.
Information
To extend the power cable, use an
ordinary 220V extension cable or the
included low voltage cable.

7. Setting up the receiver

1. Attach the antenna to the receiver.
2. Connect the 8V power adapter to the receiver and
then to a 220V socket.
3. Continue to chapter 8. Choose chapter A, B or C
depending on how you would like to see your camera
picture.
Do NOT connect the USB adapter to the
computer USB port before installation
of the drivers!
8V
- 25 -
12V
A V
D C
DE
EN
ES FI
FR
FI
FR
SV
IT
PL
SV