Winegard MT-SM10 Manual De Ensamblaje, Instalación Y Funcionamiento página 4

Setting up the Rear Cab Mount
Parts
Pivot Plate
Rear Cab
Mount Base
The pivot plate and rear cab mount base are heavy. Exercise caution when lifting and installing these parts.
Recommended Tools and Materials (Not Provided)
1/4" or 3/8" drive with 1/2" socket
1/4" or 3/8" ratchet to match socket
1/2" wrench
7/16" wrench
9" or 12" torpedo level
Phillips screwdriver
Side cutters
Recommended tools and materials may not apply in all installations. Consult the vehicle manufacturer to determine
appropriate tools and materials for a secure installation, and adhere to any vehicle manufacturer's specifications.
Failure to comply with vehicle manufacturer's specifications may lead to property damage, personal injury, and/or
death.
Page 3
Power Switch
5/16" Screw (4)
5/16" Nyloc Nut (4)
1/4"-20 Bolt (4)
1/4"-20 Lock Washer (4)
Wire connector crimpers
Wire strippers
5/16" drive
Wall Plate
Cable Entry Plate
Mounting Screw (8)
Shorter Cable Tie (2)
Dome screw (6)
Longer Cable Tie (4)
Setting up the Rear Cab Mount
Wall plate Screw (4)
Terminal Insulator (2)
Barrel Crimp Splice
Cable Clamp (4)