Craftsman 900 Serie Manual De Instrucciones página 22

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE CORRECTION
Excessive
bounce/
difficult
handling
1 Ground too dry and hard.
2 Wheels and depth stake
incorrectly adjusted.
1
2
Moisten ground or wait for more
favorable soil conditions
Adjust wheels and depth stake.
Soil bails up
or clumps
1 Ground too wet. 1 Wait for more favorable conditions.
Engineruns
buttiller won't
move
1 Tine control is not engaged.
2 V-belt not correctly adjusted.
3 V-belt is off pulley (s).
1 Engage tine control
2 Inspect/adjust V-belt.
3 Inspect V-belt.
Engine runs 1 Tilling
too
deep.
but labors
when tilling
2 Throttle control not properly
adjusted.
1 Set depth stake for shallower tilling
2 Check throttle control setting.
22