Email Setup - Logan L-D1681M-ND Manual Del Usuario

【NTP setup】
Server IP：Enter the NTP server address..
Port：Default: 123. You can set the port according to NTP server.
Update Period：The same with the NTP server check interval.

【EMAIL setup】

If the alarm is turned on or the alarm linkage photos are taken, send an email about the alarm information and
the photos to appointed address.
SMTP server：for example, SMTP server address of 126 email is: smtp.126.com.
Port：Email server port number.
SSL：Decide whether using (Secure Socket Layer) protocol to login.
User Name：Apply the email server user name.
Password：Input the password corresponding to the user.
Sender：Set the email sender address.
Receiver：Send the email to appointed receivers when the alarm is turned on. You can set three receivers at
most, and each receiver separate by ";"( Semicolon + Space), receiver and sender can use the same email.
Title：The subject of the message, you can set your own.
【IP FILTER】
When choosing the white list, only the listed IP address can connect the DVR. If not in the list ,can not
connect the DVR.
You can delete the set IP address by √ in the options.
Note：When the same IP address is in the white and black list at the same time, the black list precedence is higher.
Multi - functional
Picture 4.8 NTP
4.9 Email
25
Digital Video Recorder User Manual