Diagram And Parts Description; Connecting With A Bluetooth Device - ION Audio PARTY TIME Guia De Inicio Rapido

Diagram and Parts Description

1. Auxiliary Input: This stereo 1/8" input can be used
to connect a smartphone, MP3 player, or other audio
sources.
2. Bluetooth: The Paired LED will be lit when a device
is paired to PARTY TIME. This LED will not be lit
when PARTY TIME is first powered on (unless it was
previously paired with a device). Press the Disconnect
button to disconnect a paired Bluetooth device.
3. Master Volume Control: This adjusts the speaker's
main mix volume, which includes Microphone Input,
Auxiliary Input, and the audio of a paired Bluetooth
device.
4. Power LED: Indicates whether PARTY TIME is on or
off.
5. Party Light Button: Press this button to turn the lights
on/off.
6. Dome: The lights in the dome can react to the music
playing.
7. Power Input: The integrated power cable is connected
here.
8. Power ON/OFF Switch: Turns PARTY TIME on or off.
9. Air Vents: These vents ensure the light dome operates
efficiently.
Note: Please ensure these vents do not get covered or
blocked.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also,
try to reduce the overall volume of PARTY TIME.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.

Connecting with a Bluetooth Device

1. Turn on PARTY TIME using the power switch.
2. Navigate to your Bluetooth device's setup screen, find "Party Time" and connect.
Note: The next time you approach PARTY TIME with your Bluetooth device, it will automatically re-
connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
3. If your Bluetooth device is not able to connect to PARTY TIME, press the Bluetooth Disconnect button
on PARTY TIME to break previous Bluetooth connections and reset the Bluetooth module.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
4. The Paired LED will light up solid when it is 'paired'.
5. Start music playback from your Bluetooth device.
6. To connect to another Bluetooth device, press the Bluetooth Disconnect button. Repeat Step 2.
7. To disconnect a connected Bluetooth device, press the Bluetooth Disconnect button.
Note: If you experience trouble connecting or playing music, update your device's OS.
*WARNING: Do not look directly into the
dome light. Do not sit, stand, or apply
pressure on the dome light.
2
4
6
4 5
1
3
7
9
8