Eschenbach QUICKLOOK TOUCH Manual De Instrucciones página 18

Reading
Rotate the camera ninety de-
grees to its first click position
so that the camera is looking
downwards. Place the unit on or
slightly above the item you wish
to read. You will have to position
the camera directly over the area
of interest. In this respect Quick-
look Touch differs from a magni-
fying glass in that the image you
see does not correspond to the
area directly beneath.
Quicklook Touch can be operated and viewed from any orientation.
Changing image mode
Pressing the Mode button (refer to the diagram on page 16) on the
side of the unit will cycle through the five image modes:
Colour For general viewing
Negative Enhanced reading mode
Positive Enhanced reading mode
Semi-colour Enhanced reading mode with false colours.
Inverted Enhanced reading mode with false colours reversed
When using Quicklook Touch on different material, experiment with
the different modes to see which helps you to see best.
Note that all original colour is removed from the image in the en-
hanced modes.
The colour options used in the semi-colour modes can be selected.
Refer to the "Reading Mode Menu" later in this manual.
Freezing the image
To freeze the image, simply press and hold the Focus/Freeze button
on the side of the unit for about a second (refer to the diagram on
page 16). Pressing this button again will return to the live image.
This function can be useful, for instance, when you wish to note a
phone number and bring it to the phone for dialling. The mode can
be changed in a frozen image but the zoom buttons are disabled.
- 18 -