Strobe-Override; Blackout; Manual Rgbw Mode - Chauvet DJ Obey 4 Manual De Instrucciones

Strobe-Override

Strobe-Override will only affect fixtures that are selected.
Double-tap <STROBE> at any time to deactivate strobing for all fixtures!
If the fixture is in RGBW Operation, the faders must be adjusted above 0% in order for the

Blackout

The fading blackout function will not work when the controller is in Manual RGBW mode.
Double-tap <BLACKOUT> to instantly blackout all fixtures, regardless of what is selected,
according to the <FADE TIME> value.

Manual RGBW Mode

This controller has the ability to manually choose a custom color combination by simply using the
Red, Green Blue, and White faders. However, <MANUAL RGBW> must first be pressed. Please
see the instructions below for this operation.
Blackout dimming speed will not work in Manual RGBW mode. When <BLACKOUT> is
pressed, the lights selected will immediately turn off.
Speed/Fade Time will not work in Manual RGBW mode.
4. Operating Instructions
One of the functions for the <SPEED TIME> fader is the strobe-override function. It will work in all
operating modes.
Please see the instructions below for this operation.
1. Select one or more <FIXTURES>.
2. See note below about RGBW Operation.
3. Press <STROBE> until the appropriate LED indicator lights.
4. Adjust <SPEED TIME> to the desired level.
5. In order to return to the desired mode, press <STROBE> until the appropriate LED
indicator is off.
In order to deactivate this function for a single fixture, <STROBE> must be activated, and
<FADE TIME> must be set to 0.1M (fully down). Then, deactivate <STROBE> (the LED
indicator will turn OFF).
strobe to function.
This controller has a dedicated blackout button. This button works in conjunction with the <FADE
TIME> fader. Please see the instructions below for this operation.
1. Select one or more <FIXTURES>.
2. Adjust the <FADE TIME> fader to the desired value to determine how quickly the lights
will fade out.
3. Press <BLACKOUT> until the appropriate LED indicator lights.
The blackout function will also work with the <FADE TIME> fader when disabling the
blackout.
1. Select one or more <FIXTURES>.
2. Press <MANUAL RGBW> until the appropriate LED indicator lights.
3. Adjust the Red, Green, Blue, and White faders to the desired levels.
13