Poolmaid M5C Manual De Instruccion página 8

return line. Warranty will be null
and void if a bypass is not fitted
with pumps more than 1.5Hp
1.Kw
STEP 2
a. Ensure that the pool pump
has been switched off.
b. Turn the multi-port valve to
the closed position.
STEP 3
a. If the pool pump is below
the water level of the pool,
block the return outlet in
the pool.
b. This is done by
unscrewing the nozzle
on the outlet and placing
a plastic bag over
the opening and then
replacing the nozzle
STEP 4
a. When having planned
where to fit the chlorinator
in the return line, cut
the pipe and using
combinations of elbows,
9O° bends and pipe.
Assemble the whole
installation without gluing
at first, to ensure that the
assembly fits together.
b. Use PVC pressure cement
• The "Poolmaid Elbows" are supplied in the box.
8.
Poolmaid
Elbows
Pump
Typical poolmaid salt chlorinator
Cell inlet (10)
Poolmaid
elbow
50mm
PVC pipe
Cell
Return Line
By-pass
installation
Cell housing
(8)
Pool
Ring nut
Cell out-
let (10)
Pool-
maid
elbow