Features And Controls; Know Your Pressure Washer - Craftsman 580.752150 Manual Del Operador

Ocultar thumbs Ver también para 580.752150:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOW YOUR PRESSURE WASHER

Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
A - HydroFoam™ Launcher — Use to apply HydroFoam™
wash or other detergents designed specifically for
pressure washers.
B - Project Pro™ Nozzles — Max, General, and Delicate
Nozzles: for various cleaning applications.
C - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
D - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
E - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
F - Nozzle Extension with Quick Connect — Allows you to
switch between four different nozzles.
G - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
H - Choke Lever — Prepares a cold engine for starting.
J - Air Filter — Protects engine by filtering dust and debris
out of intake air.
K - Recoil Starter — Used for starting the engine manually.
L - Fuel Valve — Used to turn fuel supply on and off to
engine.

FEATURES AND CONTROLS

M - Throttle Lever — Sets engine in starting mode for recoil
N - Detergent Siphoning Tube/Filter — Use to siphon
P - Water Inlet — Connection for garden hose.
R - Pump — Develops high pressure.
S - Automatic Cool Down System — Cycles water through
T - Oil Drain — Drain engine oil here.
U - High Pressure Outlet — Connection for high pressure
V - Fuel Tank — Fill tank with regular unleaded fuel. Always
Items Not Shown:
Data Tag (near rear of base plate) — Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.
Oil Fill — Check and add engine oil here.
Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.
6
starter and stops a running engine.
pressure washer safe detergents into the low pressure
stream.
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
hose.
leave room for fuel expansion.
V
U
T
R
S
,
P
N
M
L
L

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido