Troubleshooting - Hkoenig HWP3 Manual De Utilización

Troubleshooting

Symptom
Appliance is not
running
Pump stop working Lack of water lead to high
Fluctuating
pressure
Appliance does not
reach operation
pressure
Trigger gun can be
used
Machine often
starts and stops by
itself
The content in this instruction manual (include accessories) is kept the final modifying and
explanation rights.
Appliance is leaking
Slight leakage from the appliance pump is normal. If the leakage increases contract the
authorized customer service.
Transport isntruction
Mind the balnace of appliance du ring moving. Put the appliance a level ground.
Eco designed handle more comfortable to move the appliance(as Pic.D).
Storage
1. Place the appliance on a level ground
2. Disconnect trigger gun and high pressure hose
3. Disconnect high pressure hose with outlet
4. Put the trigger gun into the trigger gun holder
5. Wind back power cord and high pressure
Please store the machine properly especially du ring winter
Cause
1. Machine not plugged in
2. Defective socket
3. Defective extension cable
4. lncorrect mains voltage
5. Switch off
6. Fuse has blown
temperature
1. Spray lance blocked
2. Pump is sucking air
3. lmpurities in pump
1. Spray lance blocked or worn
2. Short supply of water
3. Hose kinked
4. Filter blocked
5. Hose blocked
Trigger gun is locked
1. Safety valve worn out
2. Pump,high pressure hose,
trigger gun is leakina
Recommended action
1. Plug in machine
2. Try another socket
3. Try another extension cable
4. Check voltage correctly
5. Turn on switch
6. Replace fuse
check water flow quantity - put the
hose in the 10 bottle (per minute)
1. Clean lance with needle
2. Check that hoses and connections
are airtight
3. Contact the dealer
1. Clean or change spray lance
2. Check in let flow rate
3. Straighten out hose
4. Clean filter
5. Clean hose
UnIock trigger gun safety
1. Contact the nearest service center
2. Contact the nearest service center