Qilive Q24-161 W Manual Del Usuario página 93

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Menu Timeout
Standby LED
Software Upgrade
Application Version
Subtitle Mode
Auto TV OFF
Store Mode
Power Up Mode
CEC
CEC Auto Power On
Speakers
OSS
Installation Menu Contents
Automatic channel
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
scan (Retune)
Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
Manual Channel
This feature can be used for direct broadcast entry.
Scan
Network Channel
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial network
Scan
channels. Digital Cable: Searches for cable network channels.
Analogue Fine
You can use this setting for fine tuning analogue channels. This feature is not available if no analogue
Tune
channels are stored.
Displays installation settings menu. Standby Search(*) : Your TV will search for new or missing
channels while in standby. Any new found broadcasts will be shown. Dynamic Channel Update(*)
Installation
: If this option is set as Enabled, the changes on the broadcasts such as frequency, channel name,
Settings (Optional)
subtitle language etc., will be applied automatically while watching.
(*) Availability depends on model.
Use this setting to clear channels stored. This setting is visible only when the Country option is set
Clear Service List
to Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed in the
Network
channel list. This feature is available only for the country option of Norway.
You can use this menu item to monitor signal related informations such as signal level/quality, network
Signal Information
name etc for available frequencies.
First Time
Deletes all stored channels and settings, resets TV to factory settings.
Installation
Changes timeout duration for menu screens.
If set as Off, the standby LED will not light up when the TV is in standby mode.
Ensures that your TV has the latest firmware. Press OK to see the menu options.
Displays current software version.
This option is used to select which subtitle mode will be on the screen (DVB subtitle / Teletext
subtitle) if both is available. Default value is DVB subtitle. This feature is available only for the
country option of Norway.
Sets the desired time for the TV to automatically go into standby mode when not being operated.
Select this mode for store display purposes. Whilst Store Mode is enabled, some items in the
TV menu may not be available.
This setting configures the power up mode preference. Last State and Standby options are
available.
With this setting you can enable and disable CEC functionality completely. Press Left or Right
button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
to its input source automatically. Press Left or Right button to enable or disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier. You can
use the remote control of the TV to control the volume of the audio device.
Displays Open Source Software license information.
English - 12 -

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido