Grandin LD19CHD106 CI Manual De Instrucciones página 180

English
• PVR Settings (In DTV mode)
Preparing

1) Plug USB flash driver or USB hard disk into USB slot on the left hand side of the
TV set.
NOTE:  USB disk should have capacity at least 512MB.
USB device must support USB2.0 high-speed specification.
2) Turn TV in to DTV mode by pressing SOURCE button on remote, the PVR
function can only be used in DTV mode.
3) Press MENU button on the remote to bring the menu up, then press◄/► buttons
to highlight Setup MENU .
4) Press ▲/▼button to select PVR Settings(In DTV Mode) , then press ENTER
button togo into submenu.
PVR Settings
Press ▲/▼
sub-menu.
It will check the USB.
Format: Format USB disk.
Press ◄/►button to select Device List, then press ENTER button to enter sub-menu.
Then highlight Format.
NOTE:
Please format the USB disk when first use for PVR. Before formatting, please back up
all important files.
During the device formatting, do not disconnect the device or turn off the power. If
your USB device can't be formatted or fail to be checked by the system, it means the
device isn't compatible with the TV or is damaged. The larger USB device will take
longer time to format, please be patient until the fotmatting finishes.
GB-26
button to select PVR Settings, then press ENTER button to enter