General Features; Front Panel Features; Rear Panel Features - Master audio SM Series Manual De Usuario

1 - GENERAL FEATURES

Our amplifiers are modular in design. The metal chassis is very rigid and the interior
design provides easy access to the electronic circuits. Fully independent safety
circuits protect the amplifier in the event of a short circuit of the loudspeaker output,
abnormal increases in temperature and/or excessive amplifier consumption.
The SM Series amplifiers offer high dynamic performance with moderate average
energy consumption, as well as good damping factor, which results in clean
response to transients and high quality playback.
The power modules are integrated in a tunnel-shaped heat sink, which combines
high dissipation power with an excellent thermal inertia, thanks to the high extraction
effectiveness of the incorporated fans.

2 - FRONT PANEL FEATURES

- On-Off switch (1) Led ON.
- Volume potentiometers (Gain) (2) - Cooling outs (8)
- Output Signal indicators (-36dB, -24dB, -12dB) (3).
- Independent Indicators of Peak Limiter (4), and Protection (5)
- Bridge mode (6) and Parallel mode (7) indicators

3 - REAR PANEL FEATURES

- Forced air exhaust (8) - 230V power supply (1)
- Mains fuse (2) - XLR input signal connectors (6) & Link (7)
- Loudspeaker output connection. Speakon (3) and Binding post (4)
- Mode Selection Switches. Stereo, Bridge and Parallel (5)
- Soft Clipping switch (9)
- Input Sensitivity switch (10)
14