Menu Operation - DeFelsko PosiTector IRT Manual De Instrucciones

Gage functions are menu controlled. To access the Menu, power-up
the Gage, then press the center navigation button.
To navigate, use the Up and Down buttons to scroll vertically and
to SELECT.
Previous Page
(Exit)
Access the Menu
(Center/Select)
When powered-up, the PosiTector automatically
determines which probe is attached and does a self-
check.
To disconnect a probe from a body, slide the plastic
probe connector horizontally (in the direction of the
arrow) away from the body. Reverse these steps to
attach a different probe. It is not necessary to power-
down the Gage when switching probes.
The PosiTector gage body accepts a wide variety of probe types
including magnetic, eddy current and ultrasonic coating thickness,
environmental, surface profile, shore hardness durometer, salt
contamination and ultrasonic wall thickness probes. See
www.defelsko.com/probes

Menu Operation

Menu Operation
Next Page
Up
Down
Press the
pages in a multipage menu.
Press the
the previous menu or page.
Select Exit to exit from any menu.
Probes
Probes
3
button to switch
( )
+
button to return to
(-)