LawnMaster FD1501 Manual De Instrucciones página 13

OPERATION
CONNECTING TO POWER SUPPLY
This product is designed with a cord lock that prevents the extension cord from being pulled loose
during use.
over the rectangular tab on cord lock.
NOTE: Make a loop at the end of the extension cable and hang the loop onto the strain relief on the mains cable.
STARTING AND STOPPING THE CHIPPER SHREDDER
The ON/OFF switch (1) A circuit breaker/reset button (2) is located beside the switch.
TO OPERATE THE CHIPPER:
position and press the reset button (2), then turn the switch to the ON position.
blade to stop rotating.
(See Figure 6)
13
(See Figure 7)