Haiku Light Kit Guia De Instalacion página 9

1
Align the four screw holes on the light module with the four holes on the fan hub. Make sure the wiring
harness (a) on the light module is aligned with the wiring receptacle (b) on the fan circuit board. Secure
the light module to the fan with the screws (c).
Hardware:
c. (4) #6 x 1/2" screws
2
Plug the wiring harness (a) into the wiring receptacle (b) on the fan circuit board. Tuck the wires into the
gap on the light module to ensure they will not be visible after installation.
HAIKU ® HOME
STEP COMPLETED
7