Using The Audio Menu; Adjusting The Audio; Using The Power Control Menu - HP LC3760N Guia Del Usuario

Adjusting Advanced settings
The Advanced options depend on the input source.
Color Temp sets the white balance in increments
■
from High to Low; choose High for white with blue
tones and Low for white with red tones.
Black sets the viewing depth automatically by
■
adjusting the dark portion of an image; set to On
for high detail in black portions of the image.
3D-Y/C sets the response for minimal dot crawl
■
and cross-color noise for video input signals from
Composite Video or Analog In. Choose Standard
for normal adjustment, Fast for a movie image, or
Slow for a still image.
Monochrome sets color to monochrome for
■
viewing video without color. Set to On for
monochrome.
Film mode automatically detects a film-based
■
source (originally encoded at 24 frames per
second), analyzes, and then recreates each still
film frame for high-definition picture quality. Set to
On for automatic conversion of a film source.
Range of OPC selects the image brightness
■
minimum and maximum range for the OPC sensor
automatic adjustments. OPC must be set to On.
Using Reset
To return all adjustment options to the factory preset
values, highlight Reset and press OK, and then
highlight Yes and press OK.

Using the Audio Menu

The Audio menu sets the sound levels and the option
for the Surround Sound setting.
The Audio menu is not selectable when the Output
Select option in the Option menu is set to Variable.
Audio menu Options
Treble [scale]
Bass [scale]
Balance [scale]
Surround Off/On
Reset Yes/No

Adjusting the audio

In the Audio menu, select an item and adjust the scale
for Treble, Bass, or Balance. These options are not
selectable when Surround is set to On.
Set Surround to On to enjoy surround sound.
To control the audio output, including muting the
speakers, refer to the Output Select option in "Using
the Option Menu" on page 32.
Using Reset
To return all adjustment options to the factory preset
values, highlight Reset and press OK, and then
highlight Yes and press OK.
Using the
Power Control Menu
The Power Control menu sets options to allow you to
save energy by choosing to turn off the TV:
When there is no signal for 15 minutes.
■
When there is no operation for 3 hours.
■
Power control menu
No Signal Off
No Operation Off
Changing the TV Settings
Options
Disable/Enable
Disable/Enable
29