TaoTronics TT-CL016 Manual Del Usuario página 11

Surge ± 0.5 kV, ± 1 kV
IEC 61000-4-5 differential
mode line-line
Voltage dips, 0 % UT
EN
short interrup- (100 % dip in UT )
tions and volta- for 0.5 cycle at 0°,
ge variations 45°, 90°,
on power supply 135°,180°, 225°,
input lines 270°, and 315°
IEC 61000-4-11
0 % UT
(100 % dip in UT )
for 1 cycle at 0°
70 % UT
(30 % dip in UT )
for 25/30 cycles
at 0°
0 % UT
(100 % dip in UT )
for 250/300 cycle
at 0°
10
± 0.5 kV, ± 1 kV Mains power quality
differential should be that of a
mode line-line typical commercial or
hospital environment.
0 % UT Mains power quality
(100 % dip in UT ) should be that of a typical
for 0.5 cycle at 0°, commercial or hospital
45°, 90°, 135°,180°, environment. If the user of
225°, 270°, and the models TT-CL016
315° product name requires
continued operation
0 % UT during power mains
(100 % dip in UT ) interruptions, it is
for 1 cycle at 0° recommended that the
models TT-CL016 be
70 % UT powered from an
(30 % dip in UT )
uninterruptible power
for 25/30 cycles at
supply or a battery.
0°
0 % UT
(100 % dip in UT )
for 250/300 cycle at
0°
Power frequency 30 A/m, 50/60Hz
(50/60 Hz)
magnetic field
IEC 61000-4-8
NOTE: UT is the a. c. mains voltage prior to application of the test level.
30 A/m, 50/60Hz Power frequency
magnetic fields should
be at levels characteristic
of a typical location in a
typical commercial or
hospital environment.
EN
11