Mode Selection - Speedlink Bullfrog Manual Del Usuario

3. Type "a:setup.exe" and press ENTER key.
4. The window "DirectX 7.0 required. Continue?"
opens, please click "JA" (Yes), to continue
installation.
5. In the opening window please confirm directory by
clicking "Install".
6. Click "close" to complete installation.
Hardware Connection:
1. Plug the USB connector to your computers' USB
port, Windows system may ask you to insert
Windows 98/ME/2000/XP CD to install a new
device.
2. Click START then select Control Panel, click on
GAME CONTROLLER
3. Click on PROPERTIES. In this panel you can
test all functions of the game pad. If they don't work
properly, please calibrate the game pad. For this
click on "Settings/Calibration".

Mode Selection:

Digital Mode:
The Digital Mode is the default mode. To change (back)
to Digital Mode you have to push the Analog button
once or twice, when the analog LED is not illuminated
the Digital Mode is actived.
D
GB
F
E
I
9