Led Indicator; Audio Tones - ClearSounds CS-CLA7BT Manual De Instrucciones

Low Battery: once the voltage is lower than
3.4V, the LED indicator will turn red.
LED Indicator status with No Charger Attached
LED Status
oFF
ON (Steadily)
10 Rapid Flashes
Flashes at 3 second intervals ( 0.1
seconds ON, 2.9 seconds OFF)
Flashes at 8 second intervals (2.0
seconds ON, 6.0 seconds OFF)
LED Indicator status with Charger Attached
LED Status
oFF
ON (Steadily)
Note: When the neckloop is paired to the phone
and there is no operation for five (5) minutes,
the blue flashing LED turns off to save battery
and to make the wearer less conspicuous. To
confirm the CLA7BT is on, press and release the
Multi-Function button on the neckloop resets
the timer, and the flashing resumes.
Audio Tone
Series of 4 tone (low to high)
Series of 4 tones (high to low)

LEd INdICATOR

AUdIO TONES

16 – ENGLISH
Neckloop Action
Power OFF
Pairing Mode
Pairing Successful
Standby (No Audio Connection)
Connected to Audio
Neckloop Action
Charging Complete
Charging
Neckloop Action
Power ON
Power OFF