Uline H-4026 Manual De Instrucciones página 2

This appliance must be grounded. If it should malfunction
or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric
shock. This appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER! Improper connection of an
equipment-grounding conductor can result in
risk of electric shock. Check with a qualified
electrician or service person if you are in
doubt as to whether the outlet is properly
grounded. DO NOT modify the plug provided
with the appliance. If it will not fit the outlet,
have proper outlet installed by a qualified
technician.
This appliance is for use on a nominal 120 volt circuit
and has a grounding plug that looks like the plug
illustrated in Figure 1. A temporary adapter which
looks like the adapter illustrated in Figure 2 may be
used to connect this plug to a two-pole receptacle, as
shown, if a properly grounded outlet is not available.
The temporary adapter should be used only until a
properly grounded outlet, Figure 2, can be installed by
a qualified electrician. The grounding tab extending
Sanitaire's portable blower is intended to move air and
to dry floors, walls, furniture, etc. Durable and easy to
operate with an effective balance of static pressure and
airflow, the units are suitable for a variety of applications.
1. Portable blower is shipped ready-to-use. Prior to
plugging the unit into the power source, inspect
completely for any shipping damage.
CAUTION! To reduce the risk of electric shock,
connect only to an outlet provided with a
Ground Fault Circuit Interrupter device.
2. Place the portable blower on a stable, flat dry surface.
3. Place the portable blower into the desired operating
position (See Figures 3 and 4) while making sure
unit operates normally.
a. 4 airflow positions for H-4026 model:
Figure 3
0º
PAGE 2 OF 12
GROUNDING
20º 45º
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place
by a metal screw.
NOTE: In Canada, the use of a temporary
adapter is not permitted by the Canadian
Electrical Code.
Figure 1
Grounding blade
is longest of the
three prongs
Figure 2
Metal Screw
OPERATING
b. 3 airflow positions for H-4027 model:
Figure 4
4. All portable blowers in operation must be supervised
at all times.
PORTABLE BLOWER STORAGE
Up to 4 portable blowers can be stacked
on their sides for storage. (See Figure 5)
NOTE: Stacking feature is
not secure for transportation.
90º
Grounded Outlet Box
Ungrounded Outlet Box
Adapter
Grounding Tab
0º 20º
Figure 5
90º
0815 IH-4026