Samsung 3 Serie Manual De Usuario página 24

Settin_qital Noise Reduction
If the broadcast signal received by your TV is weak. you can activate the DigitaI Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
1. Follow the "Activating Picture Options' instructions numbers 1 and 2.
(Refer to page 20)
2. Press the A or T button to select "Digital NR", then press the ENTER _ button.
3. Press the A or T button to select "Off". "Low". "Medium", "High" or "Auto".
Press the ENTER _ button.
, Off: Turns the screen noise reduction function off.
, Low: Reduces screen noise at a low levei.
*Medium: Reduces screen noise at a medium !evek
* High: Reduces screen noise at a high level
* Auto: Automatically recognizes and reduces screen noise.
Press the EXIT button to exit.
Settinq the HDMI Black Level
You can select the black level on the screen to adjust the screen depth.
t. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 20)
2. Press the A or T button to select"HDMt Black Level". then
press the ENTER _ button.
3, Press the A or T button to select "Normal" or "Low", then press
the ENTER _ button.
, Normal: The Screen gets brighter.
• Low: The screen gets darker.
This function is active only when an external device is connected to the TV via
HDMI. "HDMI Black LeveF function may not be compatible with all external
devices.
Press the EXIT button to exit.
Settin the Film Mode
The TV can be set to automatically sense and process film signals from atl sources and
adjust the picture for optimum quality.
t. Follow the "Activating Picture Options" instructions numbers 1 and 2.
(Refer to page 20)
2. Press the A or _' button to select "Film Mode". then press the ENTER C_' button.
Press the A or _' button to select "Off" or "Auto". then press the ENTER _ button.
Press the EXIT button to exit.
:- "Film mode" is supported in TV. VIDEO. S-VIDEO, COMPONENT(480i / 1080i)
and HDMI(480i / 1080i).