808 CANZGLO Guia De Inicio Rapido página 8

Using the AUX IN input
Use a 3.5mm audio cable (not
Speaker back
included) to connect the audio
output from your device to
the AUX IN audio input on the
speaker's back panel.
The speaker automatically switches to the AUX IN audio,
and the POWER/PAIR button turns white.
To listen to Bluetooth audio again, unplug the cable from
the speaker's AUX IN jack. The speaker will try to reconnect
to the last Bluetooth device.
Note: In Bluetooth mode, the speaker will turn off
automatically if it hasn't been used for a while. In AUX IN
mode, the speaker does not automatically turn off. If you
leave a cable connected to the AUX IN jack, make sure you
turn the speaker off manually.
8