Festo SBOC-M-R1B-H Manual De Instrucciones página 29

3.3 Trigger signal
The trigger signal is applied through one of the two inputs
(I0 or I1). Trigger input and trigger condition are ad-
justable via the configuration software Festo Configuration
Tool (FCT). The trigger condition is either a positive or a
negative edge on the selected trigger input.
When the system is ready for recording and is waiting for
the trigger signal, the recording status LED (D) flashes
yellow. If the trigger signal is present, the recording LED
(C) will light up yellow for 250 ms.
Further information on operating the Compact Vision Sys-
tem can be found in the help system of the configuration
software Festo Configuration Tool (FCT).
Festo SBOC-M-R1B-H Z6 1201NH English 29