Enabling Wi-Fi Direct to share
through SmartShare
Wi-Fi Direct automatically scans nearby
Wi-Fi Direct devices and the searched
devices are listed as they are found and
you can select a specific device to share
multimedia data through SmartShare.
NOTE: Wi-Fi Direct cannot be enabled
while using other Wi-Fi functions.
1
> Apps tab > Settings
Touch
> More from the WIRELESS &
NETWORKS category > Wi-Fi Direct.
2
Select a device to connect from the
scanned device list.
CREATE GROUP – Touch to activate
group owner mode, which enables
the legacy Wi-Fi devices to connect by
scanning your phone. In this case you
must enter the password that is set in
Password.
51