Assembly - HAMPTON BAY HARPER CREEK Guía De Uso Y Cuidado

Assembly

1
Attaching the support rim to the table
leg
□ Attach the support rim (C) to the table legs (B) using M6
bolts (AA) and washers (CC).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
B
CC
AA
DD
EE
3
Turning the table over
□ Turn the table over and set the legs on the ground.
.
B
C
B
2
Attaching the table leg to the table top
□ Attach the table legs (B) to the table top (A) using M6 bolts
(BB) and washers (CC).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (EE) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Adding
DD
BB
CC
5
B
B
A
.