Lenntech Testomat 808 Manual De Mantenimiento Y De Servicio página 13


Tighten screw without hard pressure!
NOTE
Make sure that you don't exercise too much pressure on the tapped
bores. It is possible that the tapped bores
housing under hard pressure.









Tighten both screws
Connect the long tube with the indicator bottle and the short tube
with the measuring chamber.
Plug on the plug connections
®
tomat 808 (from socket J4 pump on motherboard).
Close the door of the terminal box.
Close the cover.
Open the water supply to the Testomat
Put the device into operation again.
Depressurise the lines before performing any further analyses.
Carrying out maintenance
of the pump head.

will be pushed out of the

for the power supply of the Tes-
®
808.
13