AUVEL Wireless Audio and Video transmitter
5. Operations
5.1 Turn on the sender and receiver power through ON/OFF switch.
5.2 Turn on the A/V source (satellite receiver, CD player...) and the A/V display.
5.3 Adjust the channel selector to the same channel.
6. Trouble shooting
6.1 No picture or sound
•
Check that both supply adaptors are well connected.
•
Power ON/OFF switch is in right position.
•
Check all the cables are well and rightly connected.
6.2 Interference in the image and sound
•
Move your sender or receiver slowly to find the best position for your A/V system.
•
Cut down on the distance between your sender and receiver.
•
Check if there is any radio frequency source near your receiver such as a microwave
oven.
•
If there is any interference radio frequency source near your receiver, try to switch your
channel to get a best performance.
•
Check if the sender and receiver are in the same channel.
6.3 Remote control functions do not work
•
Check if the remote control unit is going out of battery.
•
Make sure that your remote control unit is able to align the receiver IR window.
•
Make sure that both distances between the remote control unit & receiver window and
between the receiver & the sender are within the valid range (90 m).
11