Hitachi HC-A(8/64)MB Manual De Instalación Y Funcionamiento página 12

Installation
Configuration through Ethernet port

1 Connect the Network device to a computer by a ethernet cable (field supplied or available with either the Net Configuration Kit or
the CSNET MANAGER)
2 Input the following parameters:
• IP Address: 192.168.0.4
• Port: Modbus Gateway/ HC-A64NET
3 Press the button at screen
Configuration of device and communication

HC-A(8/64MB)
"Device information"
Check that the network device is correctly displayed at the "Device information" table. Press refresh button if necessary.
6 PMML0351A rev.1 - 10/2015
HC-A64NET