Bresser TNS1 Instrucciones De Uso página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
IMAGE CAPTURE
Press [
] key to capture the image. The screen
will show [ ] prompt, indicating that image cap-
ture is successful.
IMAGE REVIEW
After powering on, short press the [
enter the image viewing mode (the image shows
the last imagetaken), press the [
the previous image, press the [
next image, and press the [
viewing mode.
DELETE IMAGE
After entering the image viewing mode, press and
hold the [
] key to delete the currently viewed
image.
IMAGE EXPORT
Capture and save images can be viewed and ex-
ported via a Micro USB connection to a computer.
MODE SWITCHING
Press the [
] button to switch between the four
imaging modes of rainbow, hot metal, black heat,
and white heat.
CVBS VIDEO OUTPUT
Press and hold the [
eo output. Press and hold again to return to the
local display.
ZOOM IN/OUT
Under the power-on state, press the [
each time you press it, the target of "2X, 4X" will
be gradually enlarged and displayed. Press again
to return to the normal state.
BRIGHTNESS ADJUSTMENT OF THE DISPLAY SCREEN
Under the power-on state, press and hold the [
key to adjust the brightness. Each long press ad-
justs the brightness by 1 level.
LASER LIGHT ON / OFF
In the power-on state, press and hold the [
to turn on the laser light, and long press it again
to turn it off.
DIOPTER ADJUSTMENT
Rotate the diopter adjustment button left and
right to adjust the diopter for yourself.
FOCUSABLE LENS
Rotate the focus lens button left and right to fo-
cus. Rotate clockwise for near focus and counter-
clockwise for far focus.
Manual_9630900_Thermal-NV-TNS1_de-en-fr-nl-es-pt_BRESSER_v122020a.indd 10
Manual_9630900_Thermal-NV-TNS1_de-en-fr-nl-es-pt_BRESSER_v122020a.indd 10
] key to
] key to view
] key to view the
] key to exit Image
] key to switch to CVBS vid-
] key, and
] key
INDICATOR LIGHT
Status
Not being
charged
Power on
Blue
Power off
None
APPLICATION OF AMPLIFICATION
The magnification function may be utilized when
remote objective is photographed so as to ob-
serve the objective clearly. The effect picture is as
follows:
Normal
2X
APPLICATION OF COLOR PALETTE
The color palette menu may change the pseudo
color of infrared thermal image and provide three
types of color palettes: rainbow, Hot metal, white
heat, black heat.
The selection of proper color palette can show the
details of target object in a better manner. The
color palette of rainbow and Hot metal focuses on
display of color and is very suitable for the con-
dition of high heat contrast and used to improve
color contrast between high temperature and low
temperature. But the white heat color palettes
provide even linear color.
The image effect photographed with four types of
color palette.
]
Rainbow
Hot metal
UNDER-FLOOR HEATING, TERRESTRIAL HEAT
AND LEAKAGE POINT - DETECTION SKILL
1. Heat the floor for 3 minutes.
2. Adjust the ambient light to darkest. Stabilize the
instrument and not shake it. Stand to detect
large area.
3. Pieces of pipes appears in non leakage image.
The locality of leakage point is red.
4. A large area of red appears if floor temperature
is high. The effect is better if reducing tempera-
ture first and rising it up again.
10
In
Fully
charging
charged
Red blue
Blue
(purple)
Red
None
4X
White
Black heat
heat
09.12.2020 13:21:08
09.12.2020 13:21:08

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

9630900

Tabla de contenido