Charging With Usb; Battery Temperature Protection; Battery Charge Level; Signal Strength - Verizon LG Revere 2 Manual Del Usuario

NOTE
Please make sure that the 'B' side faces
up before inserting a charger or USB
cable into the Accessory/Charger Port
of your phone.
The charge time varies depending
upon the battery level.

Charging with USB

You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
may need to have the necessary
USB Driver installed on your PC
first. Connect one end of the USB
cable to the Accessory/Charger
Port on your phone and the other
end to the USB port on your PC.
NOTE Low-power USB ports are not
supported, such as the USB ports on
your keyboard or bus-powered USB hub.

Battery Temperature Protection

If the battery gets overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.

Battery Charge Level

You can find the battery charge
level at the top right corner of
the LCD screen. When the charge
level becomes low, the battery
sensor sounds a warning tone,
blinks the battery icon, and/or
displays a warning message. As the
charge level approaches empty, the
phone automatically switches off
without saving.

Signal Strength

Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon
bars, the stronger the signal. If
you're having problems with signal
quality, move to an open area or,
when inside a building, try moving
near a window.

Turning the Phone On and Off

Turning the Phone On

1. Insert the battery and connect
the phone to an external power
source if the battery level is low.
2. With the flip open, press the
Power/End Key
LCD screen lights up.
: the more
until the
13